目前，國內外主流的沼氣脫硫工藝包括化學脫硫、生物脫硫、濕法水洗脫硫等工藝。?化學脫硫（干法脫硫）化學脫硫反應基本原理是：H2S與脫硫劑（氧化鐵）接觸，被氧化成硫或硫氧化物的一種方法，也可稱為干式氧化法。干法脫硫設備的基本構成是：在特制的脫硫罐中放入填料（填料為氧化鐵），氣體以低流速從一端經過脫硫塔內填料層，把H2S吸附或吸收反應成硫化物或多硫化物后，余留在填料層中，凈化后氣體從脫硫塔另一端排出，實現脫硫處理的目的。H2S與罐內脫硫劑發生以下化學反應：Fe2O3·H2O+3H2S→Fe2S3·H2O+3H2O罐內脫硫劑定期晾曬再生，循環使用數次后更換。脫硫劑再生反應如下：2Fe2S3·H2O+3O2→2Fe2O3·H2O+6S脫硫劑脫硫及再生過程中，H2S與Fe2O3反應生成Fe2S3，Fe2S3與空氣接觸后又生成單質硫和Fe2O3。如此H2S被氧化成單質硫除去，同時脫硫劑得以再生。優勢：一次性投資低，運行穩定，結構簡單，使用方便。劣勢：運行成本較高，脫硫劑失效快，需定期更換脫硫劑。

　　At present, the mainstream biogas desulfurization processes at home and abroad include chemical desulfurization, biological desulfurization, wet water washing desulfurization, and other processes.? The basic principle of chemical desulfurization (dry desulfurization) is that H2S comes into contact with a desulfurizer (iron oxide) and is oxidized into sulfur or sulfur oxides, also known as dry oxidation method. The basic composition of dry desulfurization equipment is to place packing (iron oxide packing) in a specially designed desulfurization tank, and the gas passes through the packing layer in the desulfurization tower at a low flow rate from one end. H2S is adsorbed or absorbed and reacted into sulfides or polysulfides, which remain in the packing layer. After purification, the gas is discharged from the other end of the desulfurization tower to achieve the purpose of desulfurization treatment. H2S undergoes the following chemical reaction with the desulfurizer in the tank: Fe2O3 · H2O+3H2S → Fe2S3 · H2O+3H2O. The desulfurizer in the tank is periodically dried and regenerated, and is replaced after several cycles of use. The regeneration reaction of desulfurizer is as follows: 2Fe2S3 · H2O+3O2 → 2Fe2O3 · H2O+6S. During the desulfurization and regeneration process of desulfurizer, H2S reacts with Fe2O3 to generate Fe2S3, which then reacts with air to produce elemental sulfur and Fe2O3. In this way, H2S is oxidized to elemental sulfur for removal, while the desulfurizer is regenerated. Advantages: Low one-time investment, stable operation, simple structure, and easy to use. Disadvantages: High operating costs, rapid failure of desulfurizers, and the need for regular replacement of desulfurizers.

　　生物脫硫生物脫硫技術的原理為：通過營造脫硫菌適宜的工作環境，使沼氣中H2S在脫硫菌的生物氧化還原作用下生成單質硫被去除。脫硫系統屬開放系統，微生物種群隨環境改變而變化。在大多數生物發酵罐中，微生物種類以細菌為主、真菌為次，極少有酵母菌；常用的細菌是硫桿菌屬的氧化亞鐵硫桿菌、脫氮硫桿菌及排硫桿菌，最成功的代表是氧化亞鐵硫桿菌，其生長的最佳pH值為2.0～2.2。從沼氣發酵罐內導出的氣體進入生物脫硫塔，同時從發酵罐內抽出部分發酵液，用泵將發酵液從生物脫硫塔的底部抽到頂部進行淋灑，發酵液的作用是發酵液當中含有很多微生物，與沼氣中的H2S作用后，能夠生成含有硫單質的細菌，存在于生物脫硫塔內部的填充層里，這種細菌是好氧性細菌，因此，在進行生物脫硫前，沼氣應預先通過鼓風機注入微量的空氣(O2)，使其處于好氧狀態。如果沒有與H2S相遇，可以消耗自身成為H2SO4，通過發酵液的循環而排放出去；發酵液經過循環后，當其pH值降到2時，需要重新更換，原來的廢水則流到貯液池等待好氧處理。利用注入的空氣和營養液中的水分發生以下氧化還原反應：2H2S+O2→2H2O+2S2S+3O2+2H2O→2H2SO4H2S在脫硫菌的作用下進行氧化還原反應后，生成單質硫和H2SO4，貯存于塔內填料和營養液內，通過填料上生物膜的脫落和營養液的定期外排凈化。優勢：運行費用低，無需催化劑或氧化劑，無需更換濾料，脫硫效率高。劣勢：一次性投資高，過程不易控制，沼氣中氧殘留量不易控制。

　　The principle of biological desulfurization technology is to create a suitable working environment for desulfurization bacteria, so that H2S in biogas can be removed by the biological oxidation-reduction of desulfurization bacteria to generate elemental sulfur. The desulfurization system is an open system, and the microbial population changes with environmental changes. In most biological fermentation tanks, bacteria are the main microbial species, followed by fungi, with very few yeast; The commonly used bacteria are Acidithiobacillus ferrooxidans, denitrifying Acidithiobacillus, and sulfur excreting Acidithiobacillus, with the most successful representative being Acidithiobacillus ferrooxidans, whose optimal pH value for growth is 2.0-2.2. The gas exported from the biogas fermentation tank enters the biological desulfurization tower, and at the same time, a portion of the fermentation liquid is extracted from the fermentation tank. The fermentation liquid is pumped from the bottom to the top of the biological desulfurization tower for sprinkling. The function of the fermentation liquid is that it contains many microorganisms. After reacting with H2S in the biogas, bacteria containing sulfur can be generated, which exist in the filling layer inside the biological desulfurization tower. These bacteria are aerobic bacteria. Therefore, before carrying out biological desulfurization, a small amount of air (O2) should be injected into the biogas through a blower to keep it in an aerobic state. If it does not come into contact with H2S, it can be consumed to become H2SO4 and discharged through the circulation of fermentation broth; After the fermentation broth is circulated, when its pH value drops to 2, it needs to be replaced again, and the original wastewater flows to the storage tank for aerobic treatment. The following oxidation-reduction reactions occur using the water in the injected air and nutrient solution: 2H2S+O2 → 2H2O+2S2SS+3O2+2H2O → 2H2SO4H2S undergoes oxidation-reduction reactions under the action of desulfurizing bacteria, generating elemental sulfur and H2SO4, which are stored in the tower packing and nutrient solution, and purified through the shedding of biofilm on the packing and regular discharge of nutrient solution. Advantages: Low operating costs, no need for catalysts or oxidants, no need to replace filter media, high desulfurization efficiency. Disadvantages: High one-time investment, difficult process control, and difficulty in controlling residual oxygen in biogas.

　　濕法脫硫濕法脫硫裝置由吸收塔與再生塔組成。用濃度為2%～3%的碳酸鈉溶液作為吸收劑，吸收沼氣中的H2S。碳酸鈉溶液從吸收塔頂部噴淋向下與沼氣進行逆流吸收。當硫化氫含量較高，且對凈化后氣體品質要求非常高的時候采用濕法脫硫。濕法脫硫工藝較為復雜，成本較高，但穩定性較好。表2.3? 幾種主要沼氣脫硫技術的比較序號對比項優點缺點適用范圍1化學脫硫結構簡單，使用方便；運行操作簡單，無需人員值守。需要定期更換濾料；運行費用較高；脫硫劑失效快。適用于H2S含量低的中小項目或精脫硫環節。2生物脫硫運行費用低，能耗低；無需催化劑或氧化劑；無需更換濾料；脫硫效率高。一次性投資高；過程不易控制；沼氣中氧含量不易控制。適用于H2S含量高或大型沼氣項目。3濕法脫硫脫硫效果好；穩定性好工藝復雜、成本高對氣體凈化要求非常高的情況。

　　The wet desulfurization device consists of an absorption tower and a regeneration tower. Use a sodium carbonate solution with a concentration of 2% to 3% as an absorbent to absorb H2S from biogas. Sodium carbonate solution is sprayed downwards from the top of the absorption tower and undergoes countercurrent absorption with biogas. When the hydrogen sulfide content is high and the quality requirements for the purified gas are very high, wet desulfurization is used. The wet desulfurization process is relatively complex and costly, but it has good stability. Table 2.3? Comparison of several main biogas desulfurization technologies, advantages and disadvantages, applicable scope: 1. Chemical desulfurization has a simple structure and is easy to use; The operation is simple and does not require personnel to be on duty. Regular replacement of filter media is required; High operating costs; The desulfurizer fails quickly. Suitable for small and medium-sized projects or precision desulfurization processes with low H2S content. 2. Low operating costs and energy consumption for biological desulfurization; No need for catalysts or oxidants; No need to replace the filter material; High desulfurization efficiency. High one-time investment; The process is not easy to control; The oxygen content in biogas is difficult to control. Suitable for high H2S content or large-scale biogas projects. 3. Wet desulfurization has good desulfurization effect; Good stability, complex process, high cost, and extremely high requirements for gas purification.

　　本文由 沼氣脫硫   友情奉獻.更多有關的知識請點擊  http://www.bjlidejia.com/   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is contributed by the friendship of biogas desulfurization For more related knowledge, please click http://www.bjlidejia.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.